With the development of society, the use of automatic special-shaped cutting machine is more and more widespread, but glass is very common in our life, but glass cutting machine is not common. As a special-shaped glass cutting machine manufacturer, we will introduce the advantages of the full-automatic special-shaped glass cutting machine.

1, realize the operation of three axis linkage to ensure accuracy.

2, cutting speed is guaranteed and running more smoothly.

3. Quick response to cutting path according to pre design, high adjustability.

4. Real-time monitoring and dynamic display of the process on the human-machine interface.

5. High scalability ensures the upgrading of the system, the simplicity of updating and production scale.

The production line of fully automatic special-shaped glass cutting machine is composed of upper tablet, computer cutting machine, stripper and lower tablet. The whole production line is controlled by computer with high automation and convenient maintenance. Domestic independent research and development of cutting machine has also become mature, and design, research and development as a whole, and then slowly replace foreign products. As a new glass production and processing technology, automatic glass cutting machine plays a very important role in glass cutting. What are the advantages of automatic glass cutting machine?

1. single / two way cutting can be chosen at any time.

2. "Y" shaft servo dual drive can guarantee high accuracy and fast speed.

3. turn on the "X" axis and "Y" axis to find the vertical state automatically, which can further ensure the cutting accuracy.

The 4. mesa is independent and adjustable -- it can save the later maintenance cost.

5. maintenance free automatic oil filling system saves cost and efficiency.

6. It can automatically increase and decrease the amount of oil in the cutter head according to the speed of operation - reducing the amount of kerosene, which will greatly improve the quality of glass, especially coated glass.

7. Reserve the interface between the automatic code-jet system and the warehousing system to facilitate the subsequent upgrade of the equipment and prepare for the realization of the unmanned factory.

8. It has the function of automatic edge-finding-the principle of determining a coordinate system by three points, which ensures that even if the glass is transferred to the cutter skewed, it can cut out the standard size.